— Application Guide
Yagi Directional
4G/5G Antennas
High-gain Yagi directional antennas for rural coverage, fringe areas, and remote telemetry. 12 dBi across 700–960 MHz. Point once, connect reliably.
12 dBi
Gain
700–960 MHz
Band 28 & Band 5
IP55
Outdoor Rated
6-Element
Directional Array
DGY900-6 — 6 Element Yagi
6-element Yagi for 700–960 MHz. 12 dBi toward the tower on the low bands every Australian carrier uses for rural coverage. 10 m of double-shielded ALSR195 terminated N male and SMA male.
When directional gain solves the problem
Rural & remote 4G/5G coverage
Properties and sites at the edge of 4G coverage need directional gain to make the uplink work. A 6-element Yagi pointed at the nearest tower adds up to 12 dBi of gain — turning marginal signal into reliable connectivity.
SCADA & telemetry at remote sites
Remote pump stations, pipeline monitoring points, and mining RTUs where standard omni antennas don't deliver enough uplink margin. Point the Yagi at the closest tower and recover the link budget without installing new infrastructure.
Fixed wireless & CPE installations
Fixed wireless internet and CPE deployments in fringe areas where omnidirectional antennas fall short. The Yagi pattern eliminates multipath interference and concentrates gain toward the base station.
Point-to-point repeater feeds
Feeding repeaters and boosters in buildings or tunnels where the donor antenna needs maximum external gain. Directional Yagi on the donor side, omni on the serve side.
Omni vs Yagi — which do you need?
Choose Omni when:
- ·Signal is adequate from multiple directions
- ·Device moves or rotates
- ·Multiple base stations available — carrier diversity needed
- ·Ceiling or pole mount with 360° coverage required
Choose Yagi when:
- ·Only one tower direction available
- ·Signal is marginal — need every dB of gain
- ·Fixed install, no rotation required
- ·Multipath interference causing packet loss
Why engineers specify D&G Yagi
Built for the long-reach bands
700–960 MHz covers Band 28 and Band 5 on every Australian carrier. These are the bands that reach fringe and rural sites, and where directional gain matters most.
Tested before dispatch
Every Yagi tested before dispatch. VSWR verified. When you're climbing a mast at a remote site, you need the antenna to work first time.
N Female connector — no loss adapters
Direct N Female connection to your cable run. No adapters, no additional insertion loss at the connector junction. The way professional RF installations should be wired.
Bulk from 5 units
MOQ of 5 units. Volume pricing at 50+ units. For contractors specifying Yagi installations across multiple sites, talk to us about project pricing.
Also relevant: SCADA Telemetry · Mining
Browse Shop →— Get a Quote
Procurement
Made Simple
Submit your requirements below. Our engineering team responds within 1 business day with pricing and lead times.
Why quote through Xtend?
D&G Antennas — OEM supplier to ADT, JCI, Cardtronics, and Elsema. Direct to your project.
Direct to the Manufacturer
D&G Antennas makes the product. Your quote goes to the source — not a distributor or call centre.
200–500 Units Is Our Normal
Strategic pricing at 50+ units. Volume orders are our standard business — we won't blink at your quantity.
Custom Assemblies to Spec
Non-catalogue cable runs, frequency-tuned antennas, custom connector types. Quoted against your system drawings.
1-Day Response
We supply ADT, JCI, and Cardtronics — we understand what a procurement deadline means. Response within 1 business day.
50+ Units
Strategic discount applies automatically at 50 units per line item. Account pricing available for ongoing procurement.